OBD socket connector pin/terminal with wire

Connector terminal/pin with wire for use in the factory fitted OBD connector. 

Can be used in conjunction with an OBD2 socket housing to make connections to an OBD2 KKL adapter in order to make a fuel burning heater (FBH) diagnostic loom.

Also can be used by fitting this pin in location number 7 of the OBD connector, and connecting the wire end to the WBUS of the fuel burning heater (FBH).

The FBH WBUS can be connected to using this wire: http://www.disco3.co.uk/shop/index.php?act=viewProd&productId=41 or you may already have WBUS wiring factory fitted (early D3/RRS) or added by yourself. You can simply splice into the existing WBUS wire to add this.

Once fitted, you can use the Webasto diagnostic software with an OBD adapter plugged straight into the vehicle's OBD port instead of a wiring loom from the FBH and battery under the bonnet.

Includes approximately 30cm of 0.5mm² orange, black or red cable crimped onto the terminal.

These are the correct terminals as used in the factory harness so it will fit exactly as original.

For details of how to access the OBD connector and add this terminal see the wiki: link

Made by us in the United Kingdom.